Posts Tagged ‘delphi’
Honeywell has added a new Delphi video presentation to its Environmental and Combustion Controls website.
Go to: http://customer.honeywell.com/Business/Cultures/en-US/Default.htm and look to the left of the page under the “What’s New” section, then click on the Delphi Combustion Efficiency Panel Video Presentation (in red) and follow instructions to the video.
Other Delphi and related Information:
http://www.controltrends.org/2010/02/on-site-training-for-honeywell-delphi-2/
http://www.controltrends.org/2009/11/first-commercial-installation-of-delphi/
http://www.controltrends.org/2009/08/honeywell-announces-delphi/
http://www.controltrends.org/2009/08/simply-amazing-product/
http://www.controltrends.org/2009/08/honeywell-abc900-advanced-burner-control/
http://www.controltrends.org/2009/08/honeywell-mf020-oxygen-sensors/
Wow, what can I say….I am pleased to announce the first commercial installation of Honeywell’s Delphi system has been completed and is successful!
As a reminder here is what Delphi is: A single NEMA 12 panel and designated the YP900, the Delphi system is a loop and logic based integrated flame safeguard control and fuel-air ratio control with O2 trim for boiler and burner applications.
Included in the completed Delphi panel assembly are a RM7840L1075 burner safety controller with wiring sub base, S7800A Display, Modbus, built in industrial panel PC with touch screen display, ABC900A loop and logic controller for load and O2 trim control. Also included in the YP900 panel is the O2 sensor, mounting accessories and Hall-effect speed sensor with tachometer.
After a couple of small problems that were addressed by Karen Karg, Lisa Holmberg, and Bruce Mickleson at Honeywell FSG, the Delphi panel was commissioned without flaws. When dealing with new complex control systems, like we do here at Stromquist day in and day out, it is a pleasure to have a system such as Honeywell’s Delphi to work with.
Control links ML7999B motors tied into Delphi.
This installation was number one of five Delphi systems to be integrated into the boiler systems of a bio-medical division of a worldwide company. First observation from the staff engineer of the client was how impressed he was on how safely the Delphi panel is factory constructed with all relays, fuses, and wiring strips set up so hot wires are not exposed in the panel. He was also impressed on how easily Delphi was to commission using the touch screen menu driven menus without the complexities normally associated with this technology. “Even I can do it” was his exclamation of approval. Time will tell the continuing story of Delphi, but as for now Delphi gets two thumbs up from our client and from me.
I also would like to thank Dave Krause of Honeywell most of all for his experience and help in making this installation of Delphi a success.
Using a Testo combustion analyzer for Delphi commissioning.
If you are a Stromquist customer or are in GA or FL, call your Stromquist rep for help with your combustion needs. All others, please refer to one of our affiliates at the Controls Group North America site to find a distributor in your area.
When your needs turn to combustion efficiency, look to Honeywell and Stromquist for your answers. Call us at 1-800-241-9471 1-800-241-9471.
DELPHI Combustion Efficiency Panel
Historical note: Delphi the ancient city in Greece which housed the Oracle of Delphi who was consulted by kings and priests on all important matters of public policy and personal affairs.
The new Honeywell Delphi Combustion Efficiency Panel handles this job rather well in terms of burner/boiler combustion control.
Housed in a single NEMA 12 panel and designated the YP900 the Delphi system is a loop and logic based integrated flame safeguard control and fuel-air ratio control with O2 trim for boiler and burner applications.
Included in the completed Delphi panel assembly are a RM7840L1075 burner safety controller with wiring sub base, S7800A Display, Modbus, built in industrial panel PC with touch screen display, ABC900A loop and logic controller for load and O2 trim control. Also included in the YP900 panel is the O2 sensor, mounting accessories and Hall-effect speed sensor with tachometer.
The YP900 is designed to keep the fuel to air ratio to a minimum to provide complete combustion. Based on application the addition of the proper FSG amplifier, FSG time card, FSG scanner, ML7999B direct coupled actuators or HercuLine 2001 series actuators, and other components as deemed necessary, the Honeywell Delphi System, is the next step to greater combustion efficiency and control.
Ask your Stromquist Representative about DELPHI…
Honeywell has finally released the “NEW DELPHI COMBUSTION EFFICIENCY PANEL”.
This NEW panel will allow for a single panel to provide a loop and logic based integrated flame safeguard control and fuel-air ratio control, complete with O2 trim compability for burner and boiler applications. This panel also provides a simple to use touch screen panel for the boiler operator.
I am also excited and PROUD that Stromquist has a pending order for FIVE of the first DELPHI PANELS to roll off the production lines at Honeywell.
I will keep you up to date on information and the progress of this new product and the installation of the five new panels as soon as possible. So keep a sharp eye out for information on ”Bill’s Blog”.
The latest accurate information and demos on products
